Conference Proceedings
                    - NANOCON 2019
NANOCON - International Conference on Nanomaterials - Research & Application

Conference Proceedings - NANOCON 2019

11th International Conference on Nanomaterials - Research & Application
October 16th - 18th 2019 / Hotel Voronez I, Brno, Czech Republic, EU
www.nanocon.eu
ISSN: 2694-930X
ISBN: 978-80-87294-95-6

Nano Energy  - the Highlight of the NANOCON´19 Conference

The XI. International conference NANOCON took place in Brno in October 16th - 18th, 2019. In total 334 attendees from 30 countries across the world listened 75 lectures and could see 205 posters. Their common theme was nanomaterials and the latest advances in their research and applications. The conference is the largest event of its kind organized in the Czech Republic and belongs to the biggest ones held in the Central Europe.

Nanotechnology and nanomaterials in energy sector was the highlight topic of the NANOCON´19. The reason is obvious.  How to generate and store enough clean electricity is one of the key challenges of the today´s world. After all, Nobel Award in chemistry was awarded for the discovery of lithium ion batteries this year. And the potential of nanomaterials to respond successfully to this challenge is very promising.

Prof. Niyazi Serdar Sarıçiftçi the director of the Institute of Organic Solar Cells from Johann Kepler University in Linz, Austria emphasised this fact in his opening plenary lecture. This renowned material scientist presented the results of his research in the field of optical technologies. He stressed the need to use biodegradable and biocompatible materials in organic optoelectronics. Their further use is very wide - not only in solar energy, but also in biomedicine, for example. Nano-energy was also the central topic of a panel discussion. In addition to methods of energy generation by various types of cells, the issues of energy storage by batteries or supercapacitors were discussed as well. And the environmental aspect of nano technologies and nano materials used in energy sector was not neglected either.

However, the thematic scope of the conference was traditionally much broader. In Brno researchers presented their R&D results regarding the preparation, characterization of nanomaterials and their use in various sectors, including the environment and medicine. Monitoring and issues of nanomaterial toxicity as well as their impact on health and the environment were also discussed. The next plenary lecture of Prof. Martin Pumera from University of Chemistry and Technology Prague, who returned to the Czech Republic after eight years of successful research at Nanyang Technological University in Singapore, attracted deserved attention in this respect. As the director of the Center of Advanced Functional Nanorobots he outlined the fascinating possibilities of these self-managed molecular nanostructures, for example in targeted drug delivery or in environmental remediation.

The prize for the best poster has been awarded to Ondřej Pavelka from the Faculty of Mathematics and Physics, Charles University in Prague. This Young scientist in his poster presented, how is possible to optimize the fabrication of hybrid metal-semiconductor Au-Si nanostructures for plasmon enhanced luminescence. Luminescent silicon nanocrystals represent a promising alternative to the conventional semiconductor nanocrystals, especially for biological applications and Czech researchers collaborate on this research task with experts from the Kobe University in Japan.

Jan Přech from the Centre of Advanced Materials of Charles University in Prague presented the Best Lecture for the Young Scientist (up to 33 years of age). The price named after Dr. Tasilo Prnka - a major promoter of nanotechnology in the Czech Republic - he received for a lecture relating to advanced titano-silicate catalysts for selective oxidation of terpenes. On research of these nano-sponges Czech researchers work with scientists from the Center for Nanomaterials and Chemical Reactions of Institute for Basic Science in South Korean Daejon.

The next NANOCON conference will be held in October 21st – 23rd 2020 and it will accentuate the latest scientific and technological challenges in nano-electronics. More information can be found at www.nanocon.eu.

 

Jiřina Shrbená Váňová
Conference Programme Chair

Read more
MRLIK Miroslav Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, Trida T. Bati 5678, 760 01 Zlin, Czech Republic, EU, *mrlik@utb.cz
Co-authors: Martin Cvek BAZANT Pavel KURITKA Ivo
Abstract: This study deals with the effect of star-like zinc oxide (ZnO) filler addition into poly(vinylidene fluoride) (PVDF) matrix on its structural and physical properties with the consequences to mechanical energy harvesting performance. In this case, the microwave-assisted synthesis was optimized for the preparation of unique star-like shape of ZnO particles. [..] Read more
TIAGULSKYI Stanislav Institute of Photonics and Electronics of the Czech Academy of Sciences
Co-authors: YATSKIV Roman FAITOVÁ Hana KUČEROVÁ Šárka VANIŠ Jan GRYM Jan
Abstract: ZnO nanorods have attracted increasing interest in recent years due to their potential in optoelectronic applications. The lack of p-type ZnO emphasizes the importance of rectifying junctions realized on other p-type materials. [..] Read more
KULIČEK Jaroslav Faculty of Electrical Engineering, Czech Technical University, Prague, Czech Republic, EU
Co-authors: ABUDULIMU Abbasi LIU Lang LIU Guilin QI Chen REZEK Bohuslav
Abstract: Perovskites are one of the most intensively studied photovoltaic materials nowadays. Microscopic studies can provide useful information about material roughness, conductivity, structure, mechanical and opto-electronic properties as well as about kinetic effects from short to long time scale for understanding and improving the photovoltaic performance. [..] Read more
ISUPOV Fedor National Technology Initiative Center of Excellence in Advanced Manufacturing Technologies at Peter the Great St. Petersburg Polytechnic University St. Petersburg, Russia, isupov_fyu@spbstu.ru
Co-authors: ZAMOZDRA Maxim MUSHNIKOV Igor PANCHENKO Oleg
Abstract: On the basis of arc metal deposition process the technology for carbon nanotubes (CNT) addition to metal was developed. It uses extruded metal rods with CNT’s as additional material. [..] Read more
KUČEROVÁ Liliana Centre of Polymer Systems, Tomas Bata University in Zlín, Třída Tomáše Bati 5678, 760 01 Zlín, Czech Republic, EU, l7_kucerova@utb.cz
Co-authors: KOLÁŘOVÁ RAŠKOVÁ Zuzana KOUSAL Jaroslav KRTOUŠ Zdeněk SOLAŘ Pavel SEDLAŘÍKOVÁ Jana LEHOCKÝ Marián
Abstract: Polyester urethane polymer was synthesized as linked biocompatible poly (lactide)/poly (ethylene oxide) polymers. The bulk polymer was subsequently used as precursor material for plasma assisted vapour thermal deposition of thin plasma polymer films under varying RF discharge power. [..] Read more
Tomas horazdovsky Faculty of Mechanical Engineering, Czech Technical University in Prague, Czech Republic, EU.
Co-authors: Jan drahokoupil Jakub jindra Petr vlcak
Abstract: An in situ investigation has been carried out by X-ray diffraction of the evolution of the crystallite size and the microstrain of low-temperature annealed commercially pure titanium grade 2 in the state after machining and polishing. Annealing was performed in vacuum at a temperature of 300, 400 and 500°C, with various dwell times. [..] Read more
CVEJN Daniel and 1,3Petr PRAUS
Co-authors: SMÝKALOVÁ Aneta FONIOK Kryštof MATĚJKA Vlastimil
Abstract: A novel two-step pathway towards sulphur-doped graphitic carbon nitride (CN) was hypothesized and practically tested. As a result of that, three new materials with the different content of sulphur (up to 0.023 wt.%) were synthesized. [..] Read more
KŘÍŽOVÁ Hana Technical University of Liberec, Institute for Nanomaterials, Advanced Technologies and Innovation, Department of the Preparation and Analysis of Nanostructures, Bendlova 1409/7, Liberec, Czech Republic, hana.krizova@tul.cz
Co-authors: KREJČÍK Michal ŠAŠKOVÁ Jana LEMBERK Ladislav
Abstract: PMMA / PTFE optical fibers with increasing lateral emission were coated with titanium nanolayer using low-temperature plasma. We investigated how this nanolayer affected the spectrum of emission when VIS LED and UVA LED light sources were used. [..] Read more
GOVORCIN BAJSIC Emi University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia, EU, egovor@fkit.hr;nmrkonic@fkit.hr;vfilipan@fkit.hr;isutlo@fkit.hr
Co-authors: MRKONJIĆ Nikolina FILIPAN Veljko SUTLOVIĆ Igor Emilija ZDRAVEVA
Abstract: Ecological concern has recently resulted in a natural sources which are rich in cellulose, cheap and provide good prospective as reinforcements fillers in polymer matrix composites as recyclability and environmental safety. Rice husk is a cellulose-based fibrous material and a waste product of the rice processing industry. [..] Read more
ŠIHOR Marcel VSB - Technical University of Ostrava, Institute of Environmental Technology, Ostrava, Czech Republic, EU
Co-authors: VALÁŠKOVÁ Marta EDELMANNOVÁ Miroslava CHLEBÍKOVÁ Lucie KOČÍ Kamila
Abstract: Photocatalytic reduction of carbon dioxide (CO2) is a challenging reaction attracting a lot of attention. Finding a novel, efficient and relatively cheap photocatalyst is the goal of many research teams all over the world. [..] Read more
KLUČÁKOVÁ Martina Brno University of Technology, Faculty of Chemistry, Purkyňova 118/464, 612 00 Brno
Co-authors: SMILKOVÁ Marcela SEDLÁČEK Petr
Abstract: Agarose hydrogel was used as the transport medium for the investigation of the diffusion of lignohumate through plant cuticle. The cuticles were isolated from Prunus laurocerasus by two different methods: chemical and enzymatic. [..] Read more
CO PROX CO TOX in and processes ,2Evgeny FILATOV, 1,2Varvara LAGUNOVA, 1,3Dmitry POTEMKIN, 1,2Sergey KORENEV
Abstract: Thermal decomposition of complex salts [M(NH3)4]A (M = Pt, Pd; A = CrO4, Cr2O7) in oxygen atmosphere goes through the stage of formation of the phase MCrO2 with delafossite structure and it’s further decomposition and formation of the chromium oxide(III) and monometallic platinum or palladium. Thermal decomposition of complex salts [M(NH3)4]A (M = Pt, Pd; A = CrO4, Cr2O7) in hydrogen atmosphere proceeds with partial reduction of chromium to an metallic state and the formation of a metal solid solution MxCr1-x (M = Pt, Pd) with a chromium content up to 22 at.% and a chromium oxide(III). [..] Read more
BÍBOVÁ Hana J. Heyrovsky Institute of Physical Chemistry CAS, Prague, Czech Republic, EU, hana.bibova@jh-inst.cas.cz
Co-authors: ŠUBRT Jan PLIŽINGROVÁ Eva JAKUBIČKOVÁ SÁZAVSKÁ DOHNÁLEK Michaela Tereza Pavel HYKRDOVÁ Lenka JIRKOVSKÝ Jaromír
Abstract: Photocatalytic concrete screeds with self-cleaning and antimicrobial function have been developed and tested. These building materials contain sand grains with deposited composite TiO2/SiO2 layers. [..] Read more
KRAWCZYK Kamil Centre for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Studentská 1402/2, 461 17 Liberec 1, Czech Republic, EU, phone +420 485 353 006
Co-authors: WACŁAWEK Stanisław SILVESTRI Daniele TORRES-MENDIETA Rafael V.T. PADIL Vinod ŘEZANKA Michal ČERNÍK Miroslav
Abstract: Nanoscale zero-valent iron (NZVI) is one of the most important nanostructure for degradative remediation of environmental contaminants. In our research, NZVI was for the first time functionalized with cyclodextrins (CD), recently considered as excellent, environmentally friendly and cheap absorbents of toxic pollutants. [..] Read more
KOSHTYAL Yury Peter the Great Saint-Petersburg Polytechnic University, Saint-Petersburg, Russia, maximspbstu@mail.ru
Co-authors: EZHOV Ilya MITROFANOV Ilya KIM Artem NAZAROV Denis RUMYANTSEV POPOVICH Alexander Anatoly MAXIMOV Maxim
Abstract: Present work is dedicated to the development of lithium-nickel oxide film – positive electrode for solid-state lithium-ion batteries. The formation of electrochemical phase was performed by а two-step process. [..] Read more
MATĚJKOVÁ Petra VSB - Technical University of Ostrava, Centre for Advanced Innovation Technologies, 17. listopadu 15, Ostrava, Czech Republic, petra.matejkova@vsb.cz
Co-authors: MATĚJKA Vlastimil VLČEK Jozef
Abstract: The aim of this study was to evaluate the possibility of the metallurgical wastes (slags and fly ash) utilization as a support for photocatalyticaly active composites. Metallurgical slags (MS) represent large volume group of by-products originated during the metallurgical production processes. [..] Read more
VIDA Július R&D Center for Low-Cost Plasma and Nanotechnology Surface Modifications (CEPLANT), Department of Physical Electronics, Faculty of Science, Masaryk University, Kotlářská 267/2, 611 37 Brno, Czech Republic, jvida@mail.muni.cz
Co-authors: SHEKARGOFTAR Masoud SIRVIÖ Juho Antti HOMOLA Tomáš
Abstract: Cellulose, as the most abundant polymer in the world, and recently nanocellulose, have emerged as sustainable, biodegradable and recyclable substrates for flexible and printed electronics in applications that require rapid roll-to-roll manufacturing. However, the wetting and printability of any material surface are linked to its surface energy. [..] Read more
BATKA Ondrej TUL - Technical University of Liberec, Department of Textile Machine Design, Liberec, Czech Republic, EU, ondrej.batka@tul.cz
Co-authors: SKRIVANEK Josef
Abstract: The work is focused on the assessment of mutual influence of group of spinning electrodes placed in one plane in dependence on their mutual distance, during AC-electrospinning. From the results of the experiment it was found that the distance between the electrodes affects the stability of the nanofiber production process and the siding behavior while AC-electrospinning. [..] Read more
SKRIVANEK Josef TUL - Technical University of Liberec, Department of Textile Machine Design, Liberec, Czech Republic, EU, josef.skrivanek@tul.cz
Co-authors: BATKA Ondrej VALTERA Jan
Abstract: The paper deals with simulations of the distribution of electric field on the collector surface during the DC-electrospinning process. The object of the simulations was to find out whether it is possible to achieve a uniform distribution of the electric field on the surface of the circular collector. [..] Read more
MITROFANOV Ilya Peter the Great Saint-Petersburg Polytechnic University, Saint-Petersburg, Russia, maximspbstu@mail.ru
Co-authors: EZHOV Ilya KOSHTYAL Yury NAZAROV Denis KIM Artem RUMYANTSEV Aleksander POPOVICH Anatoly MAXIMOV Maxim
Abstract: The development of micro- and nanoscale power sources for micro size electronic devices such as wireless sensors, biomedical implants, and smart cards is an important task. In this work, the processes of synthesis uniform lithium oxide, cobalt oxide, and lithium cobalt oxide thin films using atomic layer deposition (ALD) method were studied. [..] Read more
Scroll to Top